Soil and Waste Pipes – Drainage Generic

Soil and Waste Pipes – Drainage Generic

Provide and fix a new soil pipe to the XXX. The new soil pipe to be 100mm diameter properly connected to the underground drainage using a suitable connector. Ensure the terminal of the vent pipe is at least 1metre above eaves level. Ensure that a suitable rodent-proof cage is fitted at the top of the pipe. Test and leave in proper working order.

Take down the defective soil pipe to the XXX. Provide and fix a new pipe of suitable material and diameter jointed in accordance with the manufacturer’s instructions and properly jointed to existing drain connections. Ensure that a suitable rodent-proof cage is fitted at the top of the pipe. Test and leave in proper working order.

Remove defective lengths of pipe to the existing soil stack to the XXX. Provide and fix new lengths of pipe using approved material and properly remake the joints. Test and leave in proper working order. Where joining different materials, use a proprietary connector. Ensure that a suitable rodent-proof cage is fitted at the top of the pipe.

Remake defective joints to the XXX soil pipe, using approved materials.

Extend the XXX soil and vent pipe to terminate not less than 1m vertically and 3m horizontally from any window or door opening. Ensure that a suitable rodent-proof cage is fitted at the top of the pipe.

Provide and fix suitable rodent-proof cage on top of the XXX soil vent pipe.

Provide additional fixings to properly secure the XXX soil vent pipe to the XXX wall.

To the drain interceptor located at XXX, remove defective front to fresh air inlet and fix new mica flap front, make good all works disturbed.

To the drain interceptor located at XXX, remove defective fresh air inlet. Provide and fix a new fresh air inlet complete using suitable materials.