Ask Chadwick

Window General Cut out the defective wood cill to the XXX window. Provide new timber cill, properly sealed and weathered, and make good all works disturbed. Cut out XXX rotten wood window sill complet

A Deans/Kawuba hybrid incorporating leak detection but a possibly useful starter for 10 please Bamber. Some bits to add and takeaway like a “common parts” type situation for where works need to b

Wash MouldWash down the mould affected and leave in a clean condition. Treat with suitable fungicide. Carry out redecoration works as necessary. Mould removalRemove the mould from the #specif

This is put here as it may be of use to someone one day. This was a scene where we’ve asked for Cast Iron rainwater drainage to be repaired on a listed building so this is jigged around to add things

I’m not sure we always think too much about roofs. This straddles the Damp & Mould hazard too and we’ve tried to incorporate some of the newer guidance around insulation requirements for thermal

I’m not sure we always think too much about roofs. This straddles the Damp & Mould hazard too and we’ve tried to incorporate some of the newer guidance around insulation requirements for thermal

Carry out an examination and repair of ceiling joists and other roof timbers damaged by a water leak to the roof at Project Location. The work shall be carried out in accordance with all applicable Bu

For severe condensation problems. Usually combine this with some improvement to heating control but a basic clause: Ventilation system 1.1 Employ a condensation specialist company to design

Reform flat layout to address hazard of “Inner Room” layout. The flat has been assessed as having an “Inner Room” layout. This means that the route of escape in the event of fire is through a

SOFFIT (Take down and renew to 30 minutes) Take down the existing soffit to the # specify exact position/room #. Construct a new soffit having a minimum fire resistance of 30 minutes, using appro